The Heavy Hitch Bucket Tooth Bar is the heavy duty tool you need to increase your bucket capacity and improve digging performance. The clamp-on tooth bar is universally compatible and installs simply with 5/8″ set screws in each tooth shank. All you need is a 5/16′ Allen wrench to install.
Compatible with several front end loader, skid steer and tractor models including (but not limited to):
49”, 53” and 61” buckets on John Deere models 45, 120R, H120, D120, H130, D160, H160, H165, 200CX and 300CX front end loader buckets.
57” bucket on John Deere 220R model loaders with standard or heavy duty material bucket.
46” on Kubota LA243 series loaders with 46.5” standard material bucket.
Be confident in the quality and longevity of our products – we use only American made steel and qualified welders.
HEAVY HITCH BUCKET TOOTH BAR DETAILS:
Universally compatible with all regular buckets (cutting bar size 1/2″ or less).
★ Features heavy duty Pengo 230 shanks (with ⅝ inch cup-point set screw); 6 shanks on the 46″ and 49″; 7 shanks on the 53″, 57″, and 61″.
★ Teeth are replaceable and interchangeable.
★ Installation is easy – no drilling required. Simply slide on and tighten set screws to 35-40 foot pounds using a 5/16″ Allen wrench.
★ Works with standard material buckets with up to a 1/2″ cutter bar.
Smooth design prevents mud and debris from hanging on.
How To Measure For A Toothbar:
① Measure the inside width of your bucket. This will determine what width you will need.
② Measure the height of your cutting edge. This standard tooth bar will fit on a cutting edge of up to 1/2″. If your cutting bar is 5/8″-3/4″, you will need our Heavy Duty Tooth Bar.
Make sure this fits by entering your model number.
[EQUIPMENT YOU CAN COUNT ON] Heavy Duty Pengo 230 shanks, 6 shanks on the 46″ and 49″ Bar | 7 shanks on the 53″, 57″ and 61″ Bar | 8 shanks on the 73″ bar
[BUILT TO LAST] Teeth are replaceable and interchangeable meaning that wear and tear doesn’t mean buying a whole new tooth bar, just replace the damaged one!
[THIS IS A STANDARD BUCKET SIZE TOOTH BAR] This tooth bar will fit on a cutting edge of 1/2″ or less. Measure the height of your cutting edge and if your cutting bar is thicker than 1/2″, you will need our Heavy Duty tooth bar. Make sure to measure the inside width of your bucket. This will determine what width you will need.
[USA MADE] Our product is manufactured in Minnesota so you know it can withstand the harshest conditions!
[GUARANTEED FIT] Our standard bucket bar is designed to work with standard material buckets that have up to a 1/2″ cutter bar and our heavy duty bucket bar works with cutter bars of more than 1/2″. Check out the full product description for some applications or let us know if you have questions!